Processor / System Bus 2 x Socket P+ (LGA 4189) 3rd Gen Intel® Xeon® Scalable Processors Family(235W) Generation E10 Core Logic Intel® C621A Chipset Memory Total Slots : 16 (8-channel per CPU, 8 DIMM per CPU) Capacity : Maximum up to 2048GB RDIMM Memory Type : DDR4 3200 RDIMM DDR4 3200 LRDIMM DDR4 3200 LR-DIMM 3DS Memory Size : 128GB, 64GB, 32GB, 16GB * Refer to support page for more information Expansion Slots Rear: - 4 x PCIe x16 slots (Gen4 x16 link,FH,FL) for dual-slot GPU cards or 8 x PCIe x16 slots (Gen4 x8 link,FH,FL) for single-slot GPU cards** - 2 x PCIe x16 slots (Gen4 x16 link,LP,HL) Front: - SKU-1 (by config) 1 x PCIe x8 slot (Gen4 x8 link,LP,HL) - SKU-2 (by config) 1 x PCIe x8 slot (Gen4 x8 link,LP,HL) or 1 x OCP3.0 slot (Gen4 x8 link) by switching cables - SKU-3 (by config) 1 x PCIe x8 slot (Gen4 x8 link,LP,HL) or 2 x M.2 sockets (Gen4 x8 link, up to 22110) by switching cables Storage Storage Controller : Intel C621A Optional kits Controller : ASUS PIKE II 3008-8i 8-port SAS 12G RAID card ASUS PIKE II 3108-8i 8-port SAS 12G HW RAID card Drive Bays 8 x 2.5" Hot-swap Storage Bays (Backplane Supports 6 x SATA/SAS + 2 x SATA/SAS/NVMe Devices*) 1 x M.2 socket (Gen3 x4 link or SATA mode, up to 2280 on-motherboard) Networking 1 x Dual Port Intel I350-AM2 Gigabit LAN controller + 1 x Mgmt LAN Front I/O Ports 4 x USB 3.2 Gen1 ports Rear I/O Ports 2 x USB 3.2 Gen1 port 1 x VGA port 1 x Management port (RJ45) 2 x Gigabit LAN ports (RJ45) Switch/LED Rear Switch/LED: 1 x Power Button/LED 1 x Location LED 1 x Message LED 1 x HDD Access LED Front Switch/LED: 1 x Power Button/LED 1 x Location Button/LED 1 x Message LED 1 x HDD Access LED 2 x LAN LED 1 x Q-code/port-80 LED OS Support Please find the latest OS support from https://servers.asus.com/support/os Management Solution ASUS Control Center Enterprise (in-band) ASMB10-iKVM (out-of-band/BMC AST2600) Regulatory Compliance BSMI, CE, FCC(Class A) Dimensions 800mm x 440mm x 88mm 31.50" x 17.22" x 3.5" Form Factor 2U Weight Net Weight: 34 Kg. Gross Weight: 44 Kg. Power Supply 1+1 Redundant 1600W 80 PLUS Platinum Power Supply Rating: 100-127Vac/200-240Vac,12.9A/9.5A,50-60Hz 1+1 Redundant 2200W 80 PLUS Platinum Power Supply Rating: 100-127Vac/200-240Vac,14A/12.6A,47-63Hz Environment Operation temperature: 10? ~ 35? / Non operation temperature: -40? ~ 70? Non operation humidity: 20% ~ 90% ( Non condensing) Note *Default supports 2 x NVMe SSD. If users need to install 4 x NVMe SSD, please remove Slimline cables from the PCIe riser board , and re-connect the cables to the backplane. **We also provide special GPU riser cards (with PCIe-switch) could support 8 single-slot GPU cards (x16 link for each). If customers need the customization, please contact ASUS sales representative for detail.

Processor / System Bus 2 x Socket P+ (LGA 4189) 3rd Gen Intel® Xeon® Scalable Processors Family(205W) Generation E10 Core Logic Intel® C621A Chipset Memory Total Slots : 16 (8-channel per CPU, 8 DIMM per CPU) Capacity : Maximum up to 2048GB RDIMM Memory Type : DDR4 3200 RDIMM DDR4 3200 LRDIMM DDR4 3200 LR-DIMM 3DS Memory Size : 128GB, 64GB, 32GB, 16GB * Refer to support page for more information Expansion Slots Rear: - 4 x PCIe x16 slots (Gen4 x16 link, FH,FL) for dual-slot GPU cards or 8 x PCIe x16 slots (Gen4 x8 link, FH,FL) for single-slot GPU cards* - 2 x PCIe x16 slots (Gen4 x16 link, LP,HL) Front: - SKU-1 (by config) 1 x PCIe x8 slot (Gen4 x8 link, LP,HL) 4 x M.2 sockets (Gen4 x4 link, up to 22110 module) - SKU-2 (by config) 1 x PCIe x8 slot (Gen4 x8 link, LP,HL) 1 x OCP3.0 slot (Gen4 x16 link) - SKU-3 (by config) 8 x 3.5” NVMe support Storage Storage Controller : Intel C621A Optional kits Controller : ASUS PIKE II 3008-8i 8-port SAS 12G RAID card ASUS PIKE II 3108-8i 8-port SAS 12G HW RAID card Drive Bays 8 x 3.5" or 2.5" Hot-swap Storage Bays (SKU-1 & SKU-2 Backplane Supports 6 x SATA/SAS + 2 x SATA/SAS/NVMe Devices**) (SKU-3 Backplane Supports 8 x SATA/SAS/NVMe Devices) 1 x M.2 socket (Gen3 x4 link or SATA mode, up to 2280 on-motherboard) Networking 1 x Dual Port Intel I350-AM2 Gigabit LAN controller + 1 x Mgmt LAN Front I/O Ports 4 x USB 3.2 Gen1 ports Rear I/O Ports 2 x USB 3.2 Gen1 port 1 x VGA port 1 x Management port (RJ45) 2 x Gigabit LAN ports (RJ45) Switch/LED Rear Switch/LED: 1 x Power Button/LED 1 x Location LED 1 x Message LED 1 x HDD Access LED Front Switch/LED: 1 x Power Button/LED 1 x Location Button/LED 1 x Message LED 1 x HDD Access LED 2 x LAN LED 1 x Q-code/port-80 LED OS Support Please find the latest OS support from https://servers.asus.com/support/os Management Solution ASUS Control Center Enterprise (in-band) ASMB10-iKVM for KVM-over-IP (out-of-band/BMC AST2600) Regulatory Compliance BSMI, CE, FCC(Class A) Dimensions 800mm x 440mm x 88mm (2U) 31.50" x 17.22" x 3.5" Form Factor 2U Weight Net Weight: 34 Kg. Gross Weight: 44 Kg. Power Supply 1+1 Redundant 1600W 80 PLUS Platinum Power Supply Rating: 100-127Vac/200-240Vac,12.9A/9.5A,50-60Hz 1+1 Redundant 2200W 80 PLUS Platinum Power Supply Rating: 100-127Vac/200-240Vac,14A/12.6A,47-63Hz Environment Operation temperature: 10? ~ 35? / Non operation temperature: -40? ~ 70? Non operation humidity: 20% ~ 90% ( Non condensing) Note *We also provide special GPU riser cards (with PCIe-switch) could support 8 single-slot GPU cards (x16 link for each). If customers need the customization, please contact ASUS sales representative for detail. **Users need to remove Slimline cables from the PCIe riser board & OCP3.0 slot board, and re-connect the cables to the backplane to support up to 8 x NVMe devices.

Processor / System Bus 1 x Socket SP5 (LGA 6096) 5th Generation AMD EPYC Processors or 4th Generation AMD EPYCProcessors AMD EPYC™ 9005/9004 Series Processors (Air cool with STD HS up to 400W) Memory 24 x DIMM slots DDR5 5600 RDIMM/ 3DS RDIMM Maximum 2,304GB with AMD EPYC™ 9005 series processors 2DPC (1 of 2) up to 5200 2DPC (2 of 2, 1R+1R ) up to 4400, 2DPC (2 of 2, 2R+2R ) up to 4000 with AMD EPYC™ 9004 series processors 2DPC (1 of 2) up to 4800, 2DPC (2 of 2, 1R+1R ) up to 4000 2DPC (2 of 2, 2R+2R ) up to 3600 * Refer to support page for more information Expansion Slots Up to 5 PCIe Gen5 slots + 1 OCP3.0 2 x PCIe Gen5 x16, FHFL or 4 x PCIe Gen5 x8, FHFL 1 x PCIe Gen5 x8, LP 1 x OCP 3.0 Slot ( (PCIe Gen5 x16) Storage Storage Controller : CPU Integrated Optional kits Controller : Broadcom Mega RAID 9560-16i ASUS PIKE II 3008-8i 8-port SAS 12G HBA card Drive Bays Front bays: 12 x 3.5” hot-swap drive bays Support up to 12NVMe/SAS/SATA Rear bays: 2 x 2.5” SATA hot-swap drive bays *SAS support only from optional SAS HBA/RAID card 2 x M.2 connectors Networking 1 x Dual Port Intel I350-AM2 GbE LAN Controller 1 x Management Port Graphic Up to 4 single-slot or 2 double-slot GPU cards Multi-GPU Support Please find the latest GPU support from https://servers.asus.com/support/GPU Front I/O Ports 2 x USB 3.2 Gen1 ports 1 x VGA port Rear I/O Ports 2 x USB 3.2 Gen1 ports 1 x VGA port 1 x Management port 2 x 1GbE LAN ports Switch/LED Front: 1 x Power Button/LED 1 x Reset Switch 1 x Location Button/LED 1 x HDD Access LED 1 x Message LED LAN 1-2 LED Rear: 1 x Port80 LED (Q-Code) 1 x Power Button/LED 1 x Location Button/LED 1 x Message LED OS Support Please find the latest OS support from https://servers.asus.com/support/os Management Solution ASUS Control Center ASUS ASMB11-iKVM (on-board) Regulatory Compliance CB, CE, RCM, FCC(Class A) Dimensions 840mm x 449mm x 88.1mm (2U) 33.07” x 17.68” x 3.47 Form Factor 2U Weight (approximate) Net Weight: 17.95 kg Gross Weight: 25.14 kg Power Supply 1+1 Redundant 2000W/1600W 80 PLUS Titanium Power Supply Environment Operating temperature: 10°C – 35°C Non operating temperature: -40°C – 70°C Non operating humidity: 20% – 90% (Non condensing) Note Operating Temperature based on configurations Optional Items Rail Kit: Tool-less Friction Rail Kit 1.5U Height Full Extension Ball bearing Type Rail Kit *Please consult sales if  cable arm needed. 2U Front Bezel Note Certain high TDP CPUs may be supported only with specific conditions. Please contact ASUS Technical Support for additional information and Thermal solution about specialized system optimization.

Processor / System Bus 1 x Socket SP5 (LGA 6096) 5th Generation AMD EPYC Processors or 4th Generation AMD EPYCProcessors AMD EPYC™ 9005/9004 Series Processors (Air cool with STD HS up to 360W) Memory 24 x DIMM slots DDR5 5600 RDIMM/ 3DS RDIMM Maximum 2,304GB with AMD EPYC™ 9005 series processors 2DPC (1 of 2) up to 5200 2DPC (2 of 2, 1R+1R ) up to 4400, 2DPC (2 of 2, 2R+2R ) up to 4000 with AMD EPYC™ 9004 series processors 2DPC (1 of 2) up to 4800, 2DPC (2 of 2, 1R+1R ) up to 4000 2DPC (2 of 2, 2R+2R ) up to 3600 * Refer to support page for more information Expansion Slots 16 NVMe configuration SKU: Up to 5 PCIe Gen5 slots + 1 OCP3.0 2 x PCIe Gen5 x16, FHFL or 4 x PCIe Gen5 x8, FHFL 1 x PCIe Gen5 x8, LP 1 x OCP 3.0 Slot ( (PCIe Gen5 x16) 24 NVMe configuration SKU: Up to 1 PCIe Gen5 slots + 1 OCP3.0 1 x PCIe Gen5 x8, LP 1 x OCP 3.0 Slot ( (PCIe Gen5 x16) Storage Storage Controller : CPU Integrated Optional kits Controller : Broadcom Mega RAID 9560-16i ASUS PIKE II 3008-8i 8-port SAS 12G HBA card Drive Bays Front bays: 16 NVMe configuration SKU: 24 x 2.5” hot-swap drive bays Support 16x NVMe + 8 SAS/SATA *RAID/PIKE cable is needed for 8 SAS/SATA 24 NVMe configuration SKU: 24 x 2.5” hot-swap drive bays Support 24x NVMe Rear bays:2 x 2.5” SATA hot-swap drive bays 2 x M.2 connectors Networking 1 x Dual Port Intel I350-AM2 GbE LAN Controller 1 x Management Port Graphic Up to 4 single-slot or 2 double-slot GPU cards *24 NVMe can‘t support GPU Multi-GPU Support Please find the latest GPU support from https://servers.asus.com/support/GPU Front I/O Ports 2 x USB 3.2 Gen1 ports 1 x VGA port Rear I/O Ports 2 x USB 3.2 Gen1 ports 1 x VGA port 1 x Management port 2 x 1GbE LAN ports Switch/LED Front: 1 x Power Button/LED 1 x Reset Switch 1 x Location Button/LED 1 x HDD Access LED 1 x Message LED LAN 1-2 LED Rear: 1 x Port80 LED (Q-Code) 1 x Power Button/LED 1 x Location Button/LED 1 x Message LED OS Support Please find the latest OS support from https://servers.asus.com/support/os Management Solution ASUS Control Center ASUS ASMB11-iKVM (on-board) Regulatory Compliance CB, CE, RCM, FCC(Class A) Dimensions 840mm x 449mm x 88.1mm (2U) 33.07” x 17.68” x 3.47 Form Factor 2U Weight (approximate) Net Weight: 19.14 kg Gross Weight: 26.63 kg Power Supply 1+1 Redundant 2000W/1600W 80 PLUS Titanium Power Supply Environment Operating temperature: 10°C – 35°C Non operating temperature: -40°C – 70°C Non operating humidity: 20% – 90% (Non condensing) Note Operating Temperature based on configurations Optional Items Certain high TDP CPUs may be supported only with specific conditions. Please contact ASUS Technical Support for additional information and Thermal solution about specialized system optimization.

  Processor / System Bus 2 x Socket SP5 (LGA 6096) AMD EPYC™ 9004 Series Max TDP : 400W Generation E12 Memory Total Slots : 24 (12-channel per CPU, 1 DIMM per CPU) Capacity : Maximum up to 3072GB per socket Memory Type : DDR5 4800/4400 RDIMM/ 3DS RDIMM Memory Size : 128GB, 64GB, 32GB RDIMM 128GB, 64GB, 32GB 3DS RDIMM * Refer to www.asus.com/support for more information Expansion Slots Up to 9 x Expansion slots 6 x PCIe Gen5 x8 or 3 x PCIe Gen5 x16 (FHFL) 2 x PCIe Gen5 x8 or 1 x PCIe Gen5 x16 or 1 x OCP3.0 (FHFL) 1 x PCIe Gen5 x16 (LPHL) *Installing GPU cards will occupied expansion slots. *GPU SKU do not support OCP3.0. Storage SATA Controller : 8 x SATA 6Gb/s ports 2 x M.2 connectors (SATA 6Gb/s & PCI-E Gen4 x4 link) SAS Controller : Braodcom HBA CARD 9500-16i (Optional) Broadcom MegaRAID 9540-8i (Optional) Broadcom MegaRAID 9560-16i (Optional) Drive Bays Front Bays: 12 x 3.5" Hot-Swap drive bays Support up to 4NVMe/SAS* + 4NVMe/SATA/SAS* + 4SATA/SAS* Rear Bays: 2 x 2.5" Hot-Swap drive bays (Optional) Support 2NVMe** *RAID card is required to support SAS hard drives. **Will occupied 2 PCIe slots Front Bays: 12 x 3.5" Hot-Swap drive bays Support up to 4NVMe/SAS* + 4NVMe/SATA/SAS* + 4SATA/SAS* Rear Bays: 2 x 2.5" Hot-Swap drive bays (Optional) Support 2NVMe** *RAID card is required to support SAS hard drives. **Will occupied 2 PCIe slots System Fan 4 Networking Option 1: 1 x Quad Port Intel I350-AM4 1G LAN Controller + 1 x Mgmt LAN Option 2: 1 x Dual Port Intel X710-AT2 10G LAN Controller + 1 x Mgmt LAN Option 3: None x + 1 x Mgmt LAN Graphic Aspeed AST2600 64MB Multi-GPU Support Please find the latest GPU support from https://servers.asus.com/support/gpu Front I/O Ports 2 x USB 3.2 Gen1 ports Rear I/O Ports 2 x USB 3.2 Gen1 ports 1 x VGA port 1 x RJ-45 Mgmt LAN port 2 x 10G or 4 x 1G RJ-45 GbE LAN port (Optional) 1 x OCP3.0 port (Optional) *GPU SKU do not support OCP3.0. Switch/LED Front Switch/LED: 1 x Power Switch (w/ LED) 1 x Reset Switch 1 x Location Switch (w/ LED) 1 x HDD Access LED 1 x Message LED LAN 1-4 LED (on NIC module) Rear Switch/LED: 1 x Port 80 LED (Q-Code) 1 x Power Switch w/ LED 1 x Location Switch w/LED 1 x Message LED OS Support Please find the latest OS support from https://servers.asus.com/support/os Management Solution On-Board ASMB11-iKVM for KVM-over-IP ASUS Control Center Enterprise (Optional) Regulatory Compliance BSMI, CE, CB, C-Tick, FCC(Class A) Dimensions 840mm x 449mm x 88.1mm (33.07" x 17.68" x 3.47") Form Factor 2U Weight Net Weight : 19.3KG Gross Weight : 25.77KG Power Supply 1+1 Redundant 2000W/1600W 80 PLUS Platinum Power Supply 1+1 Redundant 2600W/1600W 80 PLUS Titanium Power Supply Rating: 100-127/220-240Vac,12A/9.5A(x2),50/60Hz 100-127/240Vac,13.8A/16A(x2), 50/60Hz 220-240Vac, 10A(x2), 50/60Hz Environment Operation temperature: 10? ~ 35? Non operation temperature: -40? ~ 60? Non operation humidity: 20% ~ 90% (Non condensing) Optional Items Standard Cooling Solution or Enhanced Volume Air Cooling Solution Note *SAS support only from SAS HBA/RAID Card CPU Heatsink/ Cooler 2 Fan 1 (For supporting GPU SKU, it will have external fan)     Products certified by the Federal Communications Commission and Industry Canada will be distributed in the United States and Canada. Please visit the ASUS USA and ASUS Canada websites for information about locally available products. All specifications are subject to change without notice. Please check with your supplier for exact offers. Products may not be available in all markets. Specifications and features vary by model, and all images are illustrative. Please refer to specification pages for full details. PCB color and bundled software versions are subject to change without notice. Brand and product names mentioned are trademarks of their respective companies. The terms HDMI and HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. The information contained is general testing result for reference. Please consult local sales representative for more information on specific supported CPU list on each system. * Optional means “built for order”.

Specifications Processor / System Bus 2 x Socket R3 (LGA 2011-3) per Node Intel® Xeon® processor E5-2600 v4 product family (120W) * Intel® Xeon® processor E5-2600 v3 product family(120W)* QPI 6.4 / 8.0 / 9.6 GT/s *Refer to support page for more information Generation E8 Core Logic Intel® C612 PCH Memory Total Slots : 16 (4-channel per CPU, 8 DIMM per CPU) per Node Capacity : Maximum up to 1024GB LRDIMM Memory Type : DDR4 2400 /2133 /1866/1600 RDIMM DDR4 2400 /2133 /1866/1600 LRDIMM Memory Size : 32GB, 16GB, 8GB, 4GB RDIMM 64GB, 32GB LRDIMM * Refer to support page for more information * Actual memory frequency differs from Intel CPU types and memory module. Please check Intel official site for more detail about the memory types supported by each CPU. Expansion Slots per node 1 x PCIe x16 (Gen3 x16 link), LP, HL (from CPU1) 1 x PCIe x8 (Gen3 x8 link), proprietary* (from CPU1) *Support for following ASUS add-on cards (optional): PEM-FDR (56Gb/s FDR InfiniBand card) PEB-10G/57840-2S (Dual Port 10 Gigabit/s Ethernet card) PEB-10G/57811-1S (Singe Port 10 Gigabit/s Ethernet card) Storage SAS Controller : ASUS PIKE II 3008 8-port SAS HBA card(Optional) Drive Bays 12 x Hot-swap 3.5" Storage Bays (3 x Hot-swap 3.5" Storage Bays per Node) 1 x M.2 (NGFF 2242 per Node) Networking per Node 2 x Intel® I210AT + 1 x Mgmt LAN Graphic Aspeed AST2400 with 32MB VRAM Front I/O Ports N/A Rear I/O Ports per Node 2 x USB 3.0 ports 1 x VGA port 2 x RJ-45 GbE LAN ports 1 x RJ-45 Mgmt LAN port Switch/LED per Node Rear Switch/LED: 1 x Q-Code/Port 80 LED 1 x Power switch/LED 1 x Location LED 1 x Message LED 1 x HDD activity LED Front Switch/LED: 1 x Power switch/LED 1 x Location switch/LED 1 x Message LED LAN 1-2 LED OS Support Citrix XenServer 6.0 Windows® Server 2016 Windows® Server 2012 R2 Windows® Server 2012 Windows® Server 2008 R2 RedHat® Enterprise Linux SuSE® Linux Enterprise Server CentOS Ubuntu VMware Citrix XenServer *Subject to change without any notice Management Solution ASUS Control Center Enterprise (Optional) On-Board ASMB8-iKVM for KVM-over-IP Regulatory Compliance BSMI, CE, RCM, FCC(Class A) Dimensions 750mm x 444mm x 88mm 29.52" x 17.48" x 3.46" Form Factor 2U Weight Net Weight: 32 Kg Gross Weight: 36 Kg Power Supply 1+1 Redundant 1620W 80PLUS Platinum Power Supply 1000W: 100-120Vac, 12-10A, 50-60Hz, Class I 1200W: 100-140Vac, 12-10A, 50-60Hz, Class I 1620W: 180-240Vac, 10.5-8A, 50-60Hz, Class I Environment Operation temperature: 10? ~ 35? Non operation temperature: -40? ~ 70? Non operation humidity: 20% ~ 90% ( Non condensing)

Specifications Processor / System Bus 2 x Socket R3 (LGA 2011-3) per Node Intel® Xeon® processor E5-2600 v4 product family (145W) * Intel® Xeon® processor E5-2600 v3 product family(145W)* QPI 6.4 / 8.0 / 9.6 GT/s *Refer to support page for more information Generation E8 Core Logic Intel® C612 PCH Memory Total Slots : 16 (4-channel per CPU, 8 DIMM per CPU) per Node Capacity : Maximum up to 1024GB LRDIMM Memory Type : DDR4 2400 /2133 /1866/1600 RDIMM DDR4 2400 /2133 /1866/1600 LRDIMM Memory Size : 32GB, 16GB, 8GB, 4GB RDIMM 64GB, 32GB LRDIMM * Refer to support page for more information * Actual memory frequency differs from Intel CPU types and memory module. Please check Intel official site for more detail about the memory types supported by each CPU. Expansion Slots per node 1 x PCI-E x16 (Gen3 x16 link), LP, HL (from CPU1) 1 x PCI-E x8 (Gen3 x8 link), proprietary*(from CPU1) *Support for following ASUS add-on cards (optional): PEM-FDR (56Gb/s FDR InfiniBand card) PEB-10G/57840-2S (Dual Port 10 Gigabit/s Ethernet card) PEB-10G/57811-1S (Singe Port 10 Gigabit/s Ethernet card) Storage per Node SATA Controller : Intel® C612 6 x SATA3 6Gb/s ports or 5 x SATA3 6Gb/s ports + 1 x M.2 connector Intel® Rapid Storage Technology Enterprise(RSTe) (For Windows Only) (Support Software RAID 0, 1, 5, 10 ) SAS Controller : ASUS PIKE II 3008 8-port SAS HBA card(Optional) ASUS PIKE II 3108 8-port SAS HW RAID card(Optional) HDD Bays 8 x Hot-swap 2.5" Storage Bays 1 x M.2 (NGFF 2242 per Node) Networking per Node 2 x Intel® I210AT + 1 x Mgmt LAN Graphic Aspeed AST2400 with 32MB VRAM Front I/O Ports N/A Rear I/O Ports per Node 2 x USB 3.0 ports 1 x VGA port 2 x RJ-45 GbE LAN ports 1 x RJ-45 Mgmt LAN port Switch/LED per Node Rear Switch/LED: 1 x Q-Code/Port 80 LED 1 x Power switch/LED 1 x Location LED 1 x Message LED 1 x HDD activity LED Front Switch/LED: 1 x Power switch/LED 1 x Location switch/LED 1 x Message LED LAN 1-2 LED OS Support Citrix XenServer 6.0 Windows® Server 2016 Windows® Server 2012 R2 Windows® Server 2012 Windows® Server 2008 R2 RedHat® Enterprise Linux SuSE® Linux Enterprise Server CentOS Ubuntu VMware Citrix XenServer *Subject to change without any notice Management Solution ASUS Control Center Enterprise (Optional) On-Board ASMB8-iKVM for KVM-over-IP Regulatory Compliance BSMI, CE, RCM, FCC(Class A) Dimensions 750mm x 444mm x 88mm 29.52" x 17.48" x 3.46" Form Factor 2U Weight Net Weight: 39.92 Kg Gross Weight: 43.92 Kg Power Supply 1+1 Redundant 2000W 80PLUS Titanium Power Supply Rating: 100-140 Vac or 180-240Vac,12-9.5A (x2) or 9.5-7A, 50-60Hz, ClassI Environment Operation temperature: 10? ~ 35? Non operation temperature: -40? ~ 70? Non operation humidity: 20% ~ 90% ( Non condensing)

ASUS Server 2U SP5 Epyc Typ osazení : max 1x AMD CPU SP5 max 24x Ram DDR5 max 24x 2,5 SATA / NVMe Lan,VGA . Provedení šasí 2U

Up to 4 x NVIDIA ® PCIe Gen4 GPU cards NVIDIA-Certified system for scalability, functionality, security, and performance Single AMD EPYC™ 7002 series processor family 8-Channel RDIMM/LRDIMM DDR4 per processor, 8 x DIMMs 1 x dedicated management port 4 x SATA 3.5" hot-swappable HDD/SSD bays in front side 2 x 2.5" Gen4 U.2/SAS/SATA hot-swappable HDD/SSD bays in rear side 2 x PCIe Gen4 expansion slots 1 x OCP 3.0 Gen4 x16 mezzanine slot 2 x 80 PLUS Platinum 1600W redundant PSU

Dimensions (WxHxD, mm) 2U 4 Nodes - Rear access 440 x 87.5 x 475 Motherboard MZ12-HD0 Rev. 3.0 CPU AMD EPYC™ 7003 series processor family Single processor, 7nm technology Up to 64-core, 128 threads per processor TDP up to 225W, cTDP up to 240W Conditional support 280W Compatible with AMD EPYC™ 7002 series processor family Socket Per Node: 1 x LGA 4094 Total: 4 x LGA 4094 Socket SP3 Chipset System on Chip Memory Per node: 8 x DIMM slots Total: 32 x DIMM slots DDR4 memory supported only 8-Channel memory architecture RDIMM modules up to 128GB supported LRDIMM modules up to 128GB supported 3DS RDIMM/LRDIMM modules up to 256GB supported Memory speed: Up to 3200 MHz LAN Per node: 2 x 1GbE LAN ports (1 x Intel® I350-AM2) 1 x Dedicated management port Total: 8 x 1GbE LAN ports (1 x Intel® I350-AM2) 4 x Dedicated management ports Video Integrated in Aspeed® AST2500 2D Video Graphic Adapter with PCIe bus interface 1920x1200@60Hz 32bpp, DDR4 SDRAM Audio N/A Storage Per node: 1 x 2.5" NVMe hot-swappable SSD bays Total: 4 x 2.5" NVMe hot-swappable SSD bays All storage bays are compatible with SATA devices SAS N/A RAID N/A Peripheral Drives N/A Expansion Slots Per node: 1 x Low profile half-length slots with PCIe x16 (Gen4 x16 bus) 1 x Low profile half-length slots with PCIe x16 (Gen3 x16 bus) 1 x OCP 2.0 mezzanine slot with PCIe Gen3 x16 bandwidth (Type1, P1, P2, P3, P4 with NCSI supported) 2 x M.2 slots: - M-key - PCIe Gen3 x4 - Supports NGFF-2242/2260/2280/22110 cards - CPU TDP is limited to 155W if using M.2 device Total: 4 x Low profile half-length slots with PCIe x16 (Gen4 x16 bus) 4 x Low profile half-length slots with PCIe x16 (Gen3 x16 bus) 4 x OCP 2.0 mezzanine slot with PCIe Gen3 x16 bandwidth (Type1, P1, P2, P3, P4 with NCSI supported) 8 x M.2 slots: - M-key - PCIe Gen3 x4 - Supports NGFF-2242/2260/2280/22110 cards - CPU TDP is limited to 155W if using M.2 device Internal I/O Per node: 2 x M.2 slot 1 x USB 3.0 header 1 x TPM header 1 x OCP 2.0 mezzanine slots 1 x Front panel header 1 x Back plane board header 1 x IPMB connector 1 x Clear CMOS jumper 1 x BIOS recovery jumper Front I/O Per node: 1 x Power button with LED 1 x ID button with LED 1 x Status LED 1 x Reset button Total: 4 x Power button with LED 4 x ID button with LED 4 x Status LED 4 x Reset button Rear I/O Per node: 2 x USB 3.0 1 x VGA 2 x RJ45 1 x MLAN 1 x ID LED Total: 8 x USB 3.0 4 x VGA 8 x RJ45 4 x MLAN 4 x ID LEDs Backplane I/O 4 x ports Speed and bandwidth: SATA 6Gb/s or SAS 12Gb/s or PCIe Gen3 x4 per port TPM 1 x TPM header with SPI interface Optional TPM2.0 kit: CTM010 Power Supply 2 x 1200W redundant PSUs 80 PLUS Platinum AC Input: - 100-240V~/ 12-7A, 50-60Hz DC Input: - 240Vdc/ 6A DC Output: - Max 1000W/ 100-240V~ +12V/ 80.5A +12Vsb/ 3A - Max 1200W/ 200-240V~ or 240Vdc input +12V/ 97A +12Vsb/ 3A System Management Aspeed® AST2500 management controller GIGABYTE Management Console (AMI MegaRAC SP-X) web interface Dashboard JAVA Based Serial Over LAN HTML5 KVM Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.) Sensor Reading History Data FRU Information SEL Log in Linear Storage / Circular Storage Policy Hardware Inventory Fan Profile System Firewall Power Consumption Power Control LDAP / AD / RADIUS Support Backup & Restore Configuration Remote BIOS/BMC/CPLD Update Event Log Filter User Management Media Redirection Settings PAM Order Settings SSL Settings SMTP Settings OS Compatibility Windows Server 2016 ( X2APIC/256T not supported) Windows Server 2019 Red Hat Enterprise Linux 8.3 ( x64) or later SUSE Linux Enterprise Server 12 SP5 ( x64) or later SUSE Linux Enterprise Server 15 SP2 ( x64) or later Ubuntu 18.04.5 LTS (x64) or later Ubuntu 20.04 LTS (x64) or later VMware ESXi 6.7 Update3 P03 or later VMware ESXi 7.0 Update1 or later Citrix Hypervisor 8.2.0 or later System Fans 3 x 80x80x38mm (16,300rpm) 1 x 40x40x28mm (25,000rpm) Operating Properties Operating temperature: 10°C to 35°C Operating humidity: 8%-80% (non-condensing) Non-operating temperature: -40°C to 60°C Non-operating humidity: 20%-95% (non-condensing) Ambient temperature limited to 30°C if using 280W CPU Packaging Dimensions 857 x 670 x 280 mm Packaging Content 1 x H242-Z10 4 x CPU heatsinks 1 x Rail Kit Part Numbers Barebone package: 6NH242Z10MR-00 Rev. A00 Spare parts: - Motherboard: 9MZ12HD0NR-00 - Back plane board: 9CBPH043NR-00 - Rail kit: 25HB2-AA6107-K0R - CPU heatsink: 25ST1-44320J-A0R - Back plane board: 9CBPH043NR-00 - Fan module: 25ST2-44282D-D0R/ 25ST2-88382E-D0R - CMC Kit: 6NH242Z12SR-00 - M.2 Heatsink kit: 6NH242Z17SR-00-100 (in option) - Power Supply: 25EP0-212007-F3S

Standard Rackmount Server Intel® Xeon® processor E5-2600 V3 / V4 product family 24 x RDIMM/LRDIMM ECC DIMM slots 4 x 2.5" hot-swappable NVMe bays 20 x 2.5" hot-swappable SAS/SATA bays 2 x GbE LAN ports (Intel® I350-BT2) 2 x 1200W 80 PLUS Platinum redundant power supply

42x hot-swap SATA/SAS/NVMe drive bays.SAS expander with 12Gb/s transfer speed. 2z Ultra-Fast M.2 with PCIe Gen3 x4 bandwidth. Redundant power option. Single AMD EPYC™ 7002 series processor family 8-Channel RDIMM/LRDIMM DDR4, 16 x DIMMs 2 x 1Gb/s LAN ports (Intel® I350-AM2) 1 x dedicated management port 36 x 3.5" SATA/SAS hot-swap HDD/ SSD bays 2 x 2.5" SATA hot-swap SSD bays 4 x 2.5" SATA/NVMe hybrid hot-swap SSD bays SAS expander with 12Gb/s transfer speed 2 x Ultra-Fast M.2 with PCIe Gen3 x4 bandwidth Up to 4 x PCIe Gen4 slots and 2 x PCIe Gen3 low profile slots Dual 1200W 80 PLUS Platinum redundant power supply

Dimensions (WxHxD, mm) 1U 430 x 43.5 x 625 mm Motherboard MZ31-AR0 CPU AMD EPYC™ 7001 series processor family Single processor, 14nm, Socket SP3 Up to 32-core, 64 threads TDP up to 200W Chipset System on Chip Memory 16 x DIMM slots DDR4 memory supported only 8-Channel memory architecture RDIMM modules up to 64GB supported LRDIMM modules up to 128GB supported Memory speed: 2666(1DPC)/2400/2133* MHz - Note: Memory speed run at 2133MHz when 1R/2R memory modules are fully populated LAN 2 x SFP+ 10Gb/s LAN ports (Broadcom® BCM 57810S) 1 x 10/100/1000 management LAN Video Integrated in Aspeed® AST2500 2D Video Graphic Adapter with PCIe bus interface 1920x1200@60Hz 32bpp Audio - Storage 4 x 3.5" SATA/SAS hot-swappable HDD/SSD bays 2.5" HDD/SSD supported SAS card is required for SAS devices support RAID - Peripheral Drives 1 x Slim type ODD as an option NOTE: For 12.7mm ODD only Expansion Slots 1 x Riser card: - 1 x CRS1013 * 1 x Full-height half-length slot with PCIe x16 (Gen3 x16 bus) slot 1 x M.2 slot: - M-key - PCIe Gen3 x4 - Supports NGFF-2280/2260/2242 cards Internal I/O 1 x 24-pin ATX main power connector 2 x 8-pin ATX 12V power connectors 4 x SlimSAS connectors 1 x M.2 slot 2 x CPU fan headers 5 x System fan headers 1 x USB 3.0 header 1 x USB 2.0 header 1 x COM_2 header 1 x TPM header 1 x Front panel header 2 x LAN activity LED 1 x HDD back plane board header 1 x PMBus connector 1 x IPMB connector 1 x Clear CMOS jumper 1 x BIOS recovery jumper 1 x Buzzer Front I/O 2 x USB 3.0 1 x Power button with LED 1 x ID button with LED 1 x Reset button 1 x NMI button 1 x System status LED 1 x HDD activity LED 2 x LAN activity LEDs Rear I/O 2 x USB 3.0 2 x USB 2.0 1 x VGA 1 x COM_1 2 x SFP+ 1 x MLAN 1 x ID button with LED Backplane I/O 4 x SATA/SAS ports Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port SAS card is required for SAS devices support TPM 1 x TPM header with LPC interface Optional TPM2.0 kit: CTM000 Power Supply 2 x 650W redundant power supply 80 PLUS Platinum AC input: - 100-240Vac, 50-60Hz, 10-5A DC input: - 190-310Vdc, 5-3A DC output: - 650W System Management Aspeed® AST2500 management controller Avocent® MergePoint IPMI 2.0 web interface: Network settings Network security settings Hardware information Users control Services settings IPMI settings Sessions control LDAP settings Power control Fan profiles Voltages, fans and temperatures monitoring System event log Events management (platform events, trap settings, email settings) Serial Over LAN vKVM & vMedia (HTML5) OS Compatibility Windows Server 2012 R2 with Update Windows Server 2016 Red Hat Enterprise Linux 7.4 (x64) or later Red Hat Enterprise Linux 8.0 (x64) or later SUSE Linux Enterprise Server 11.4 (x64) or later SUSE Linux Enterprise Server 12.3 (x64) or later SUSE Linux Enterprise Server 15 (x64) or later Ubuntu 16.04 LTS (x64) or later Ubuntu 18.04 LTS (x64) or later Ubuntu 20.04 LTS (x64) or later VMware ESXi 6.5 Update1 or later VMware ESXi 6.7 or later VMware ESXi 7.0 or later Citrix Xenserver 7.1.0 CU2 or later Citrix Xenserver 7.4.0 or later Citrix Hypervisor 8.0.0 or later Weight 13 kg (barebone) System Fans 5 x 40x40x56mm (23000rpm) Operating Properties Operating temperature: 10°C to 35°C Operating humidity: 8%-80% (non-condensing) Non-operating temperature: -40°C to 60°C Non-operating humidity: 20%-95% (non-condensing) Packaging Dimensions 959 x 588 x 248 (mm) Packaging Content 1 x R151-Z30 system 1 x CPU heatsink 1 x Quick Installation Guide 1 x Rail kit Part Numbers Server unit: 6NR151Z30MR-00-1* Motherboard: 9MZ31AR0NR-00-1* Rail Kit: 25HB2-3A6101-K0R CPU heatsink: 25ST1-15320D-J1R Power supply: 25EP0-206504-F3S Power Supply PDB: 25EP1-206500-F3S

Supports up to 8 x double slot GPU cards NVIDIA® validated GPU platform; Supports for NVIDIA® Tesla® GPUs 2nd Gen. Intel® Xeon® Scalable and Intel® Xeon® Scalable Processors 6-Channel RDIMM/LRDIMM DDR4, 24 x DIMMs Supports Intel® Optane™ DC Persistent Memory 2 x 10Gb/s BASE-T LAN ports 1 x Dedicated management port 8 x 2.5" hot-swappable HDD/SSD bays 8 x PCIe Gen3 expansion slots for GPUs 2 x PCIe x16 Half-length low-profile slots for add-on cards Aspeed® AST2500 remote management controller Dual 2000W 80 PLUS Titanium redundant/hot-swap power supply Optimized performance with Mellanox Infiniband EDR and Ethernet 100G products

Supports up to 8 x double slot GPU cards AMD EPYC™ 7001 series processor family 8-Channel RDIMM/LRDIMM DDR4, 8 x DIMMs 2 x SFP+ 10Gb/s LAN ports (Mellanox® ConnectX-4 Lx) 1 x Dedicated management port 8 x 2.5" hot-swappable HDD/SSD bays 2 x M.2 with PCIe Gen3 x4/x2 interface 8 x PCIe Gen3 expansion slots for GPUs 2 x PCIe x16 half-length low-profile slots for add-on cards Aspeed® AST2500 remote management controller Dual 2200W 80 PLUS Platinum redundant/hot-swap power supply Optimized performance with Mellanox Infiniband EDR and Ethernet 100G products

Dimensions (WxHxD, mm) 2U 430 x 87 x 710 mm Motherboard MZ01-CE1 CPU AMD EPYC™ 7002 series processor family Single processor, 7nm, Socket SP3 Up to 64-core, 128 threads per processor TDP up to 225W, cTDP up to 240W Fully support 280W Compatible with AMD EPYC™ 7001 series processor family Chipset System on Chip Memory 8 x DIMM slots DDR4 memory supported only 8-Channel memory architecture RDIMM modules up to 128GB supported LRDIMM modules up to 128GB supported Memory speed: Up to 3200*/ 2933 MHz - Note: * Follow BIOS setting and memory QVL list if running 3200 Mhz LAN 2 x 1Gb/s LAN ports (Intel® I210-AT) 1 x 10/100/1000 management LAN Video Integrated in Aspeed® AST2500 2D Video Graphic Adapter with PCIe bus interface 1920x1200@60Hz 32bpp Audio - Storage Front side: 12 x 3.5" SATA/SAS hot-swappable HDD/SSD bays 2.5" HDD/SSD supported Rear side: 2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays Front side default configuration supports: 12 x SATA drives or 4 x SATA drives 8 x SAS drives SAS card is required for SAS devices support RAID - Peripheral Drives - Expansion Slots Total 5 x low profile PCIe Gen3 expansion slots - Slot_7 (PCIe_7): 1 x PCIe x16 (Gen3 x16 bus) - Slot_5 (PCIe_5): 1 x PCIe x16 (Gen3 x16 bus) - Slot_4 (PCIe_4): 1 x PCIe x8 (Gen3 x8 bus) - Slot_3 (PCIe_3): 1 x PCIe x16 (Gen3 x16 bus) - Slot_1 (PCIe_1): 1 x PCIe x16 (Gen3 x16 bus) 1 x M.2 slot: - M-key - PCIe Gen3 x4 - Supports NGFF-2242/2260/2280/22110 cards Internal I/O 1 x 24-pin ATX main power connector 2 x 8-pin ATX 12V power connectors 4 x SlimSAS connectors 1 x M.2 slot 1 x CPU fan headers 6 x System fan headers 1 x USB 3.0 header 2 x COM headers 1 x TPM header 1 x Front panel header 1 x HDD back plane board header 1 x PMBus connector 1 x IPMB connector 1 x Clear CMOS jumper 1 x BIOS recovery jumper Front I/O 2 x USB 3.0 1 x Power button with LED 1 x ID button with LED 1 x Reset button 1 x NMI button 1 x System status LED 1 x HDD activity LED 2 x LAN activity LEDs Rear I/O 2 x USB 3.0 1 x VGA 2 x RJ45 1 x MLAN 1 x ID switch with LED 1 x Power switch with LED Backplane I/O Backplane P/N: 9CBP20C3NR-00 Speed and bandwidth: SAS 12Gb/s, SATA 6Gb/s TPM 1 x TPM header with LPC interface Optional TPM2.0 kit: CTM000 Power Supply 2 x 800W redundant PSUs 80 PLUS Platinum AC Input: - 100-240V~/ 10-4A, 50-60Hz DC Input: - 240Vdc/ 4.5A DC Output: - 800W +12V/ 66A +12Vsb/ 2.5A System Management Aspeed® AST2500 management controller GIGABYTE Management Console (AMI MegaRAC SP-X) web interface Dashboard JAVA Based Serial Over LAN HTML5 KVM Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.) Sensor Reading History Data FRU Information SEL Log in Linear Storage / Circular Storage Policy Hardware Inventory Fan Profile System Firewall Power Consumption Power Control LDAP / AD / RADIUS Support Backup & Restore Configuration Remote BIOS/BMC/CPLD Update Event Log Filter User Management Media Redirection Settings PAM Order Settings SSL Settings SMTP Settings OS Compatibility For AMD EPYC™ 7002 series processor family Windows Server 2016 ( X2APIC/256T not supported) Windows Server 2019 Red Hat Enterprise Linux 7.6 ( x64) or later Red Hat Enterprise Linux 8.0 ( x64) or later SUSE Linux Enterprise Server 12 SP4 ( x64) or later SUSE Linux Enterprise Server 15 SP1 ( x64) or later Ubuntu 16.04.6 LTS (x64) or later Ubuntu 18.04.3 LTS (x64) or later Ubuntu 20.04 LTS (x64) or later VMware ESXi 6.5 EP15 or later VMware ESXi 6.7 Update3 or later VMware ESXi 7.0 or later Citrix Hypervisor 8.1.0 or later For AMD EPYC™ 7001 series processor family Windows Server 2012 R2 with Update Windows Server 2016 Red Hat Enterprise Linux 7.4 (x64) or later Red Hat Enterprise Linux 8.0 (x64) or later SUSE Linux Enterprise Server 11.4 (x64) or later SUSE Linux Enterprise Server 12.3 (x64) or later SUSE Linux Enterprise Server 15 (x64) or later Ubuntu 16.04 LTS (x64) or later Ubuntu 18.04 LTS (x64) or later Ubuntu 20.04 LTS (x64) or later VMware ESXi 6.5 Update1 or later VMware ESXi 6.7 or later VMware ESXi 7.0 or later Citrix Xenserver 7.1.0 CU2 or later Citrix Xenserver 7.4.0 or later Citrix Hypervisor 8.0.0 or later Weight 20 kg (barebone) System Fans 4 x 80x80x38mm (16300rpm) Operating Properties Operating temperature: 10°C to 35°C Operating humidity: 8%-80% (non-condensing) Non-operating temperature: -40°C to 60°C Non-operating humidity: 20%-95% (non-condensing) Packaging Dimensions 982 x 588 x 268 (mm) Packaging Content 1 x R271-Z00 system 1 x CPU heatsink 1 x Rail kit Part Numbers Rackmount: 6NR271Z00MR-00-A* Motherboard: 9MZ01CE1NR-00-2* Back plane board: 9CBP20C3NR-00 CPU heatsink: 25ST1-15320E-J1R Fan module: 25ST2-883829-D0R Power supply: 25EP0-208004-L0S Rail Kit: 25HB2-3A0202-K0R

AMD EPYC™ 7001 series processor family 8-Channel RDIMM/LRDIMM DDR4, 16 x DIMMs 2 x SFP+ 10Gb/s LAN ports (Broadcom® BCM 57810S) 1 x Dedicated management port 16 x 2.5" hot-swappable HDD/SSD bays Ultra-Fast M.2 with PCIe Gen3 x4 interface 7 x low profile PCIe Gen3 expansion slots Aspeed® AST2500 remote management controller 800W 80 PLUS Platinum redundant PSU

AMD EPYC™ 7001 series processor family 8-Channel RDIMM/LRDIMM DDR4, 16 x DIMMs 2 x SFP+ 10Gb/s LAN ports (Broadcom® BCM 57810S) 1 x Dedicated management port 16 x 2.5" hot-swappable HDD/SSD bays Ultra-Fast M.2 with PCIe Gen3 x4 interface 7 x low profile PCIe Gen3 expansion slots Aspeed® AST2500 remote management controller 800W 80 PLUS Platinum redundant PSU

Single AMD EPYC™ 7002 series processor family 8-Channel RDIMM/LRDIMM DDR4, 16 x DIMMs 2 x 1Gb/s LAN ports (Intel® I350-AM2) 1 x Dedicated management port 12 x 3.5" and 2 x 2.5" SATA hot-swappable HDD/SSD bays Ultra-Fast M.2 with PCIe Gen3 x4 interface 6 x PCIe Gen4 / Gen3 expansion slots 1 x OCP 2.0 Gen3 x16 mezzanine slot Aspeed® AST2500 remote management controller 800W 80 PLUS Platinum redundant power supply

Dimensions (WxHxD, mm) 2U 438 x 87.5 x 660 mm Motherboard MZ32-AR0 CPU AMD EPYC™ 7002 series processor family Single processor, 7nm technology Up to 64-core, 128 threads per processor TDP up to 225W, cTDP up to 240W Conditional support 280W Compatible with AMD EPYC™ 7001 series processor family Chipset System on Chip Memory 16 x DIMM slots DDR4 memory supported only 8-Channel memory architecture RDIMM modules up to 128GB supported LRDIMM modules up to 128GB supported Memory speed: Up to 3200*/ 2933 MHz - Note: * Follow BIOS setting and memory QVL list if running 3200 Mhz with 2DPC LAN 2 x 1GbE LAN ports (1 x Intel® I350-AM2) 1 x 10/100/1000 management LAN Video Integrated in Aspeed® AST2500 2D Video Graphic Adapter with PCIe bus interface 1920x1200@60Hz 32bpp Audio - Storage Total 26 x 2.5" SATA/SAS hot-swappable HDD/SSD bays - Front side: 24 x 2.5" SATA/SAS hot-swappable HDD/SSD bays - Rear side: 2 x 2.5" SATA/SAS hot-swappable HDD/SSD bays - All devices are connected with SAS expander Onboard SAS35x36R expander Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port Default configuration supports: 0 x SAS/SATA drives Please select SAS card to enable the drive bays RAID Depends on SAS HBA Peripheral Drives - Expansion Slots Total 6 x low profile PCIe Gen4 / Gen3 expansion slots Slot_6: 1 x PCIe x16 (Gen4 x16 bus) slot Slot_5: 1 x PCIe x16 (Gen4 x8 bus) slot Slot_4: 1 x PCIe x16 (Gen4 x16 bus) slot Slot_3: 1 x PCIe x16 (Gen4 x16 bus) slot Slot_2: 1 x PCIe x8 (Gen3 x0 or x8 bus) slot Slot_1: 1 x PCIe x16 (Gen3 x16 or x8 bus) slot; shared with slot_2 1 x OCP 2.0 mezzanine slot with PCIe Gen3 x16 bandwidth (Type1, P1, P2, P3, P4; Type2 P5 with NCSI supported) 2 x M.2 slots: - M-key - PCIe Gen3 x4 - Supports NGFF-2242/2260/2280 cards Internal I/O 2 x M.2 slots 1 x USB 3.0 header 1 x USB 2.0 header 1 x COM_2 header 1 x TPM header 1 x Front panel header 1 x HDD back plane board header 1 x PMBus connector 1 x IPMB connector 1 x Clear CMOS jumper 1 x BIOS recovery jumper 1 x Buzzer Front I/O 2 x USB 3.0 1 x Power button with LED 1 x ID button with LED 1 x NMI button 1 x Reset button 2 x LAN activity LEDs 1 x HDD activity LED 1 x System status LED Rear I/O 3 x USB 3.0 1 x VGA 1 x COM 2 x RJ45 1 x MLAN 1 x ID button with LED Backplane I/O Front side_CBP20O5: 24 x SATA/SAS ports Rear side_CBP2021: 2 x SATA/SAS ports Speed and bandwidth: SATA 6Gb/s or SAS 12Gb/s per port TPM 1 x TPM header with SPI interface Optional TPM2.0 kit: CTM010 Power Supply 2 x 800W single PSUs 80 PLUS Platinum AC Input: - 100-240V~/ 10-4A, 50-60Hz DC Input: - 240Vdc/ 4.5A DC Output: - 800W +12V/ 66A +12Vsb/ 2.5A NOTE: * Select 1200W power supply if using 280W CPU with full loading configuration System Management Aspeed® AST2500 management controller GIGABYTE Management Console (AMI MegaRAC SP-X) web interface Dashboard JAVA Based Serial Over LAN HTML5 KVM Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.) Sensor Reading History Data FRU Information SEL Log in Linear Storage / Circular Storage Policy Hardware Inventory Fan Profile System Firewall Power Consumption Power Control LDAP / AD / RADIUS Support Backup & Restore Configuration Remote BIOS/BMC/CPLD Update Event Log Filter User Management Media Redirection Settings PAM Order Settings SSL Settings SMTP Settings OS Compatibility Windows Server 2016 ( X2APIC/256T not supported) Windows Server 2019 Red Hat Enterprise Linux 7.6 ( x64) or later Red Hat Enterprise Linux 8.0 ( x64) or later SUSE Linux Enterprise Server 12 SP4 ( x64) or later SUSE Linux Enterprise Server 15 SP1 ( x64) or later Ubuntu 16.04.6 LTS (x64) or later Ubuntu 18.04.3 LTS (x64) or later Ubuntu 20.04 LTS (x64) or later VMware ESXi 6.5 EP15 or later VMware ESXi 6.7 Update3 or later VMware ESXi 7.0 or later Citrix Hypervisor 8.1.0 or later Weight Net Weight: 16.68 kg Gross Weight: 23.66 kg System Fans 4 x 80x80x38mm (16,300rpm) Operating Properties Operating temperature: 10°C to 35°C Operating humidity: 8%-80% (non-condensing) Non-operating temperature: -40°C to 60°C Non-operating humidity: 20%-95% (non-condensing) Packaging Dimensions 982 x 588 x 268 (mm) Packaging Content 1 x R272-Z31 system 1 x CPU heatsink 1 x Rail kit Part Numbers Barebone package: 6NR272Z31MR-00 Spare parts: - Motherboard: 9MZ32AR0NR-00 - Rail kit: 25HB2-3A0202-K0R - CPU heatsink: 25ST1-15320E-J1R - SAS Expander module: 9CEP26O0NR-00 - Back plane board_12-port: 5CBP20O5NR-00 - Back plane board_2-port: 9CBP2021NR-00 - Front panel board: 9CFP2001NR-00 - Fan module: 25ST2-883829-D0R - Power supply: 25EP0-208004-L0S - Fan duct for 280W CPU: 25HA8-R27231-S5R ( optional) - 4 x U.2 Kit: 6NR272Z3ASR-00( optional)